Safety Information; Unpacking And Inspection - arjo Skin IQ 1000 Microclimate Manager Mode D'emploi

Safety Information

Please refer to and follow any safety information in the product labeling for the
pressure redistribution surface and / or bed frame being used with the
Skin IQ 1000 MCM.
Power Cord
Only use a grounded power outlet and the power cord supplied with the Skin IQ 1000 power supply. The
power cord should be positioned to avoid a tripping hazard and / or damage to the cord. The Skin IQ 1000
MCM should never be operated with a worn or damaged power cord. Should the power cord become worn or
damaged, contact Arjo or an Arjo authorized representative to order a replacement.
Coverlet
Use care when handling or transporting. Dropping or other sudden impacts may result in damage to the
device.
Skin Care
Monitor skin conditions regularly and consider adjunct or alternative therapies for high acuity patients. Give
extra attention to any possible pressure points and locations where moisture or incontinence may occur or
collect. Early intervention may be essential to preventing skin breakdown.
The Skin IQ MCM Product Family has an antimicrobial agent formulated into the
patient contact layer. Although rare, there is a potential that some patients may
experience sensitivity or a reaction during use. Regularly monitor the patient's skin
condition. Discontinue use and seek medical treatment if any signs of a reaction are
observed.
If a serious incident occurs in relation to this medical device, affecting the user, or the patient then the user
or patient should report the serious incident to the medical device manufacturer or the distributor. In the
European Union, the user should also report the serious incident to the Competent Authority in the member
state where they are located.
For more information about the Skin IQ MCM Product Family, please visit www.arjo.com.
Patient Weight
The maximum patient weight for this device is 453.59 kg (1000 lb). In addition, consult the specifications for
the pressure redistribution surface and / or bed frame being used. Additional weight limitations may apply.
Disposal
The coverlet contains electrical components that may be removed and disposed of separately.
See Disposal on page 8 for removal.
General Protocols
•
Avoid contact of sharp instruments with the Skin IQ 1000 MCM. Punctures, cuts and tears will prevent
proper operation.
•
Follow all applicable safety rules and institution protocols concerning patient and
caregiver safety.

UNPACKING AND INSPECTION

Unpack the Skin IQ 1000 MCM from the shipping box and locate items as listed.
•
coverlet with instructions for use booklet (included in complete kit or coverlet only)
•
power supply (included in complete kit or available as a separate item)
•
power cord (included in complete kit or power supply only)
Inspect all items carefully. If any items are damaged or missing, contact Arjo or an Arjo authorized
representative.
EN
7