Extending The Bed - arjo Minuet 2 Notice D'utilisation

Extending the bed

To accommodate taller patients, the mattress platform can be extended by
13cm (5 ins.) as follows.
C
Install a suitable foam mattress extension (squab) at the head end when
the bed is extended.
Remove the two socket head
screws (A) securing the foot end
panel to the bed.
B
Pull the foot end panel out from the
bed (B) and line up the end fixing
holes below the mattress platform
with the fixing holes below the foot
end panel section.
Refit the socket head screws (A) to
secure the foot end panel in the
extended position. Make sure both
A
screws are fully tightened.
Squeeze the split ends of the two
retaining pins (C) and push them
D
up and out of the holes.
Pull the mattress retaining bar (D)
towards the foot end of the bed.
Line up the second pair of fixing
holes in the mattress retaining bar
with the holes in the leg section.
Refit the two retaining pins by
pushing them down through the leg
section and mattress retaining bar.
WARNING
23