arjo Minuet 2 Notice D'utilisation page 17

E
5
Assemble the foot end mattress platform to the head end mattress
platform by sliding the two parts together. Make sure the slot in the head
end section (E) locates over the bar in the foot end section.
Fit socket head screws into the two holes (F) on the underside of the foot
end mattress platform to fix the sections together, fitting the bottom screw
first. Tighten both screws firmly.
6
Assemble the foot end panel to the bed, lining up the fixing holes in the
arms with the fixing holes (G) in the foot end mattress platform section.
Fit two socket head screws into the holes to fix the two sections together,
fitting the bottom screw first. Tighten both screws firmly.
The foot end mattress platform section has two sets of fixing holes.
Use the ones closest to the crossbar as shown. The other holes (H) are
used if it is necessary to extend the bed.
F
F
G
G
H
16