To lower the safety side:
Hold the top rail at the foot end of the bed, keeping your hand clear of the
hinge point (E).
Pull out and hold the red release knob (F). This is located on the safety side
bracket at the foot end of the bed.
Lower the safety side towards the foot end of the bed. Let go of the release
knob.
To raise the safety side:
Hold the top rail at the foot end of the bed, keeping your hand clear of the
hinge point (E).
Pull the rail upwards until the safety side locks in the raised position.
The safety side release knob contains a yellow band (G). If the yellow band is
visible it means that the safety side is NOT securely locked in the upright
position.
G
UNLOCKED
Make sure the release knob is locked in place.
The yellow warning band on the release knob MUST NOT be visible when
the safety side is in the fully raised and locked position.
Accessory weight – folding safety sides (per side)
CM-ACC06.52
CM-ACC07.52
WARNING
7.7kg
9kg
LOCKED
32