Egress Assist Rail - arjo Minuet 2 Notice D'utilisation

Egress assist rail

The clinically qualified person responsible should consider
the size, age and condition of the patient before allowing the
use of egress assist rails.
Do not use the egress assist rails like safety side panels due
to the short length of the accessory.
These instructions illustrate the fitting of egress assist rails model
CM-ACC22-1.52. Extra height egress assist rails CM-ACC23-1.52
are fitted and used in the same way. Extra height egress assist rails
should be used when the mattress thickness is between 150mm and
172mm (Refer to page 12).
Egress assist rails are supplied as a matching pair to suit the right and left
hand sides of the bed; these instructions show an egress assist rail on the
patient's left-hand side.
Once installed, this accessory can be placed in two positions. In the raised
position, it can be used to aid a patient in rising from the bed. When lowered,
it provides additional security for patients in cases where the use of longer
side rails is not desirable.
Egress assist rail - raised
The egress assist rail is not compatible with these accessories:
Full length side rails CM-ACC00-1, CM-ACC01-1, CM-ACC04-1,
Folding side rails CM-ACC06-1 and CM-ACC07-1.
WARNING
Egress assist rail - lowered
44