Display Status Bar; Prepare The Doppler For Use; Battery Insertion / Replacement; Probe Connection - arjo HUNTLEIGH DMX Mode D'emploi

4.3

Display Status Bar

Status Bar Icons
Battery Level Low
USB Connected
Forward Flow
(Flow towards probe)
Arterial Mode
Heart Rate Indicator
5.

Prepare the Doppler for Use

5.1

Battery Insertion / Replacement

Disconnect the Doppler from other equipment before removing the battery cover.
Insert a suitable tool into the recess, release the
clip and gently lever off the battery cover.
• Use either alkaline LR6 (non-rechargeable) or NiMH HR6 (rechargeable) batteries.
• Do not mix rechargeable and non-rechargeable batteries.
Note: If the Doppler will not be used for an extended period, remove the batteries.
5.2

Probe Connection

To connect the probe, align the arrow on the connector with the slot on the probe and push together fi rmly.
To disconnect the probe, pull the connector from the probe. DO NOT pull the cable.
The Status Bar appears at the top of most screens, the
information displayed depends on the operating mode.
Date / Time
27/01/2015 14.30
5MHz
Probe Type
Reverse Flow
(Flow away from probe)
Venous Mode
Insert the batteries according to the diagram,
observing polarity.
EN