AUGER CLUTCH SWITCH
The auger and blower will start to turn when the drive clutch lever and
auger clutch switch is operated. Check around the snow thrower for safety
before operating the lever and switch.
5) Push the auger clutch switch to
operate on the auger and blower.
• The indicator (green) comes on
when you push the auger clutch
switch.
• When the auger clutch switch is
pushed for three seconds or
longer, the protection function
gets armed. This stops the auger
and blower from turning.
• The auger and blower keep
turning while the drive clutch
lever is squeezed. Push the auger
clutch switch again to stop the
auger and blower. (Interlocking
operation of the drive clutch lever
and auger clutch switch)
61