Honda HSM1380i Manuel De L'utilisateur page 61

MAIN SHIFT LEVER
AUGER CLUTCH SWITCH
DRIVE CLUTCH LEVER
AUGER CLUTCH SWITCH
DRIVE CLUTCH LEVER
58
5) Move the main shift lever fully to
the end of the forward low speed
range slowly and clear the snow.
FAST
RANGE
• When the auger hits against the
road or inclines to a side, adjust
LOW
RANGE
the auger housing position by
operating the auger housing
control switch.
• When the snow is small in volume
or light in nature, move the main
shift lever to the high speed side.
Perform minor adjustment of the
main shift lever to stabilize the
operating speed if necessary.
6) When the drive clutch lever is
released, the auger clutch switch
indicator (green) goes off, both the
auger and blower stop turning, and
the snow thrower stops moving.
To move from one place to another,
or to change direction, use the drive
clutch lever only. Release the drive
clutch lever once, then squeeze the
drive clutch lever again.