Honda HSM1380i Manuel De L'utilisateur page 31

Drive clutch lever
Squeezing the drive clutch lever drives the snow thrower forward or backward
with the main shift lever operation.
If you are moving the snow thrower from one place to another, squeeze the
drive clutch lever only.
Auger clutch switch
If you continue pressing the auger clutch switch, the indicator comes on as a
reminder and the snow blowing mechanism starts. Releasing the switch stops
the mechanism and the indicator goes off. With the drive clutch lever squeezed,
the auger clutch switch will be on continuously by pressing it once. Releasing the
drive clutch lever stops the snow thrower from moving and stops the auger.
• If the indicator (green) does not come on and neither the auger nor blower
turns by pressing the auger clutch switch, have your authorized Honda snow
thrower dealer check the snow thrower.
• When the auger clutch switch is pushed for three seconds or longer, the
protection function gets armed. This stops the auger and blower from
turning.
AUGER CLUTCH SWITCH
28
DRIVE CLUTCH LEVER
ENGAGED
DISENGAGED
·······
·······
ENGAGED
DISENGAGED