Specifications - Honda HSM1380i Manuel De L'utilisateur

Model
Type
Description code
Engine
Model
Engine net power
(in accordance with SAE J1349*)
Displacement
Bore × stroke
Starting method
Ignition system
Oil capacity
Fuel tank capacity
Spark plug
Battery
Carbon dioxide (CO2) emissions**
* The power rating of the engine indicated in this document is the net power
output tested on a production engine for the engine model and measured in
accordance with SAE J1349 at 3,600 min
engines may vary from this value.
Actual power output for the engine installed in the final machine will vary
depending on numerous factors, including the operating speed of the engine
in application, environmental conditions, maintenance, and other variables.
** The CO2 measurement results from testing over a fixed test cycle under
laboratory conditions a(n) (parent) engine representative of the engine type
(engine family) and shall not imply or express any guarantee of the
performance of a particular engine.

13. SPECIFICATIONS

HSM1380iK1
ETD type
GX390T2
8.7 kW (11.8 PS)/3,600 min
3
389 cm (23.7 cu-in)
88.0 × 64.0 mm (3.46 × 2.52 in)
Electric starter
CDI magneto
1.1 L (1.2 US qt, 1.0 lmp qt)
5.7 L (1.51 US gal, 1.25 lmp gal)
BPR5ES (NGK)
W16EPR-U (DENSO)
12V 35Ah/20HR × 2 (connect in series)
Please refer to "CO2 Information List" on
www.honda-engines-eu.com/co2
-1
(Engine Net Power). Mass production
ETDR type
SAYJ
-1
119