Honda HSM1380i Manuel De L'utilisateur page 37

AUGER CLUTCH SWITCH
OFF
OFF
ENGINE SWITCH
position properly or if you want to return the initial position to the factory set
position, consult with your authorized Honda snow thrower dealer.
Skid, Scraper
Adjust the skid and the scraper according to the road surface condition where
you are to clear the snow. Use the skid to determine the height from the ground
to the auger, and adjust the scraper to make the snow surface even (see page
49).
34
SKID SCRAPER
– 5.Push the auger clutch switch. The
reset switch indicator goes off
and the initial position is
changed.
– 6.Turn the engine switch to the OFF
position.
• Note that you cannot operate
the snow thrower without
turning the engine switch to
the OFF position once.
If you cannot change the initial
AUGER