Honda HSM1380i Manuel De L'utilisateur page 54

Masquer les pouces Voir aussi pour HSM1380i:

Table des Matières

Les langues disponibles

• To clear the snow more neatly:

Bring the skid to be in contact with the ground with the auger raised

approximately 10 mm from the ground. Secure the skid in this position.

Secure the scraper by bringing it in contact with the ground.

Factory pre-set clearance:

At the scraper (A): 3—7 mm (0.1—0.3 in)

At the auger (B): 8—12 mm (0.3—0.5 in)

Approx. 10 mm

Chapitres

Table des Matières