MAIN SHIFT LEVER
THROTTLE CONTROL LEVER
THROTTLE CONTROL LEVER
Throttle control lever
Fast range
Slow range
*For the amount of removed snow, 2nd is the largest.
62
FAST
RANGE
LOW
RANGE
Engine speed
4th
Fast
3rd
2nd
1st
Slow
6) Move the main shift lever fully to
the end of the forward low speed
range slowly and clear the snow.
• When the auger hits against the
road or inclines to a side, adjust
the auger housing position by
operating the auger housing
control switch.
• When the snow is small in volume
or light in nature, move the main
shift lever to the high speed side.
Perform minor adjustment of the
main shift lever to stabilize the
operating speed if necessary.
7) After stabilizing the operating
speed, adjust the snow discharge
distance by operating the throttle
control lever as needed.
• Traveling speed will decrease by
increasing the snow discharge
distance, while the speed will
increase by decreasing the snow
discharge distance. Adjust the
snow discharge distance by
operating the throttle control
lever as needed.
Snow discharge
distance
Long
Short
Snow amount*
Small
Large
Small