Honda HSM1380i Manuel De L'utilisateur page 24

ICS switch (Intelligence Control System)
[HSM1380i]
Use the ICS switch to change the work mode (automatic adjustment) of the
snow thrower. The work mode can be selected from one of the two modes of
ON and OFF.
ICS SWITCH
Push the ICS switch to turn the mode ON, the indicator (green) turns on as a
reminder. Push it once again to turn the mode OFF, and the indicator also goes
off.
Characteristics of ON mode:
• Travel speed is automatically adjusted according to the workload so engine
power can be maintained at or near the maximum level.
• Engine speed is automatically adjusted according to operating conditions so
the snow discharge distance remains constant that have been set with the
throttle control lever.
• The auger is automatically raised when the snow thrower is reversing. In case
the auger clutch switch is in the ON position, the auger is automatically
returned to the original position when the snow thrower begins moving
forward again (ETDR type).
Characteristics of OFF mode:
• No automatic adjustment is made. Manually adjust the engine speed and
travel speed according to the workload.
· · · · · · · ON
······· OFF
OFF ON
21