Honda HSM1380i Manuel De L'utilisateur page 121

Emergency transport
You can move the snow thrower by pushing or pulling it without engine power.
Place the snow thrower on the level ground after transportation and use a new
cotter pin when replacing the wheel pin.
1. Remove the cotter pins from the rear right and left wheels.
2. Remove the wheel pins from the rear right and left wheels.
3. The track rotates freely, allowing the operator to move the snow thrower
without engine power.
• Before removing the wheel pins, make sure to stop the rotating parts, stop
the engine and remove the engine switch key.
• Do not remove the wheel pins on the slope. The snow thrower may move
unintentionally, causing injury.
118
WHEEL PIN
COTTER PIN