Honda HSM1380i Manuel De L'utilisateur page 62

3b. Clearing in ON (HSM1380i)/POWER (HSM1390i) mode
With the ICS switch in the ON position (HSM1380i)/mode selector switch
in the POWER position (HSM1390i) you can adjust the engine speed and
snow discharge distance. Use the throttle control lever to adjust the
engine speed, which determines how fast snow is picked up and how far it
is thrown. Use the chuter control switch to adjust height and direction of
the snow discharge.
• Note that the throttle control lever only functions after the auger is
turning. The engine speed is maintained automatically in ON
(HSM1380i)/POWER (HSM1390i) mode (see page 24).
THROTTLE CONTROL LEVER
[HSM1380i]
ICS SWITCH
[HSM1390i]
THROTTLE CONTROL LEVER
POWER mode
CHUTER CONTROL SWITCH
··· ON
··· OFF
ON
1) Set the throttle control lever in the
third position from the bottom.
2) Operate the chuter control switch
to adjust the snow discharge
direction and angle (see page 30).
59