Publicité
This User Manual has been translated using machine translation. We have made every effort to
ensure the translation is accurate, but please note that automated translations are not perfect
and are not meant to replace human translators. The official version of the User Manual is in
English. Any differences between the translated version and the original English are not legally
binding. If you have any questions about the accuracy of the translation, please refer to the English
version, which is the official reference. More language versions are available upon request via
info@expondo.com.
Technical data
Parameter description
Product name
Model
Rated voltage [V~] / frequency [Hz]
Rated power [W]
Work type
Protection rating IP
Rotation speed [rpm]
Efficiency [%]
Power factor [cos Φ]
Dimensions [width x depth x height; mm]
Weight [kg]
These instructions must be read carefully to ensure safe and proper installation, operation, and
maintenance of the motor. The specified safety instructions must be paid attention and fully
followed.
The following symbols are taken part in the operating manual.
WARNING
This symbol indicates a warning of dangerous situations in terms of life and property
safety
ELECTRIC SHOCK HAZARD
This symbol indicates a warning against an electric shock hazard. The symbol means
that caution should be taken against the risk of electric shock and necessary
measures should be taken.
This device is an electric motor that converts electric energy into mechanical energy. Motor is
designed for a wide range of drive applications both for line operation as well as in conjunction with
frequency converters.
The motor has not been designed for hazardous area applications.
General Safety Rules:
Please read the operating manual of motor for proper storage, installation, and operation.
Mechanical and electrical installation and maintenance shall be done by qualified technicians!
For your personal safety and to prevent material damage when working on the motor, always
observe the safety instructions and the following safety rules.
Disconnect the system. Disconnect the auxiliary circuits, for example anti-condensation
heating.
Prevent reconnection.
Make sure that the equipment is at zero voltage.
EN
Parameter value
Electric engine
MSW-EEM-AD02
400|690 / 50
5500
IP54
2860
85.9
0.78
480 x 250 x 330
41.1
S1
Publicité
