Publicité
8.1 ALARMS AND WARNINGS
This type of oven can display 2 types of information:
• Alarms (which inform of a malfunction and interrupt the operation
of the oven)
• Warnings (which do not depend on a malfunction and do not inter-
rupt the operation of the oven, but provide information that can be
useful for a better functioning of the oven)
In the examples on the side are shown 3 malfunctions that interrupt
the operation of the oven:
•
Intervention of the safety thermostat of the cooking chamber.
•
Intervention of the motor thermal protection
•
Excessive temperature of the components
Other alarm messages that the oven can display are:
•
Intervention of the boiler safety thermostat
•
Chamber temperature probe malfunction
•
Malfunction of the drain temperature probe
•
Core probe malfunction
•
Malfunction inverter
•
Lack of water
•
System overloaded
•
Open phase
Unlike alarms, warnings are not tied to a malfunction and do not
interrupt oven operation.
Normally they are activated when the user can make a choice or to
guide him in the correct use of the oven.
Some examples are shown in the images on the side.
STOP
COOLING
CONNECT THE PROBE TO THE OVEN
27
02.03.2021
CHAMBER SAFETY THERMOSTAT
02.03.2021
MOTOR THERMAL PROTECTION
02.03.2021
COMPONENTS OVERHEATING
02.03.2021
THE DOOR HAS BEEN CLOSED.
DO YOU WANT TO STOP COOLING?
IGNORE
02.03.2021
TOO HIGH TEMPERATURE.
THE COOKING RESULT MAY DIFFER
FROM WHAT YOU EXPECTED.
SKIP AND GO ON
02.03.2021
THIS COOKING REQUIRES
THE USE OF THE CORE PROBE.
EN
Publicité
