Publicité
In the operating screen, in the line where the remaining time or the
core probe temperature is normally displayed, MULTI LEVEL is dis-
played to indicate that the cooking duration control is now managed
by this function.
To add a new cooking level, press MULTI LEVEL.
The oven will again show the screen with all cooking levels.
Depending on whether the control to be added is timed or with a
probe, press the time (00:00) or temperature (0 °) value of the cho-
sen level.
The example shows the addition of a cooking with a core probe.
In the new activated level, both the temperature detected by the
probe (larger) and the one set for the end of cooking (smaller) are
visible.
Pressing the text ACTIVE TRAYS, only the levels to which a control
has been assigned are displayed.
When the time expires, or when the core probe temperature is
reached, the buzzer is activated and the number of the tray level to
be extracted is shown on the screen.
The cooking does not stop but continues until there are level controls
active.
If the last cooking also ends, the oven displays the screen on the
right, as normally happens at the end of a manual cooking.
The Multi Level control is disabled.
MANUAL
MULTI LEVEL
65°
MIN 20 / MAX 100
MULTI LEVEL
DELETE
MULTI LEVEL
MULTI LEVEL
DELETE
MULTI LEVEL
11
190°
07
00:11
14°
06
/65°
05
06
00:11
14°
04
/65°
02
02.03.2021
Ready!
06
02.03.2021
Ready!
EN
Publicité
