Publicité
By pressing the INFO icon, the screen shows the in-
stalled software versions.
Press OK to return to the previous screen.
This information may be requested by the manufacturer to check the
compatibility of an update.
The SETTINGS icon gives access to various actions re-
lating to the oven parameters.
This type of oven has parameters which are the same for all models
and which are managed directly by the firmware.
This section is used to manage the parameters that change accor-
ding to the oven model.
The possible operations from this screen are:
Import parameters from pen drive.
To do this, the pen drive must contain a file called parameters.xml.
No password is required for this operation.
Export parameters to pen drive.
This operation creates a file on the pen drive containing the oven parameters.
No password is required for this operation either.
Parameter management from the screen.
This operation, protected by a password, allows you to view (and possibly modify) all the parame-
ters of the oven.
This type of modification is reserved exclusively for the manufacturer.
The USB CONNECTION icon gives access to the func-
tions relating to the transfer of recipes to or from a
USB pen drive.
By pressing the icon from the access screen to complementary func-
tions, you access the screen shown on the side.
The possible operations from this screen are:
25
PROGRAM:
DS_01_001_000_FW_01.00.01
SERVICE: 0.1.0
BASE: 0.43
OK
02.03.2021
02.03.2021
EN
Publicité
