Gima VITAL PRO SNET PC-900 Instructions D'emploi page 32

In this screen, the first column is the patient ID, the second column is SpO
value, and the fourth column is pulse rate (measured by SpO
Operating instruction:
Ø Short press the Up "
Ø Short press the Print "
Ø Long press the OK "
delete all SpO data records.
2
4.7 Alarm Event List Screen
The Alarm Event List screen is as shown in Figure 4.8.
In this screen, the first column is the time that the alarm occurred (format is month-day hour:minute), the second column
is the event description, the third column is the onset value, and the fourth column is the high/low limit value.
Ø Short press the "
event description is too long to be shown, pressing the OK key can show the full description, but the third and
fourth column will not be displayed.
Ø Short press the print "
Figure 4.7 SpO
" or Down " " key to scroll to previous or next page for view other SpO
" key to print the current SpO
" key to bring up a dialogue for deleting data records, where the user can choose to
Figure 4.8Alarm event list
" or " " key to scroll to previous/next page for view other alarm events. Note: if the
" key to print the event list of the current page.
data list screen
2
module).
2
list.
2
26
recording time, the third column is SpO
2 2
records.
2