Gima VITAL PRO SNET PC-900 Instructions D'emploi page 13
Moniteurs de signes vitaux
Masquer les pouces
Voir aussi pour VITAL PRO SNET PC-900:
- Mode d'emploi (56 pages) ,
- Mode d'emploi (64 pages)
Publicité
Les langues disponibles
Les langues disponibles
3.1.4 Underside of the Monitor
3.2 Battery Installation
1. Ensure that the monitor is not connected to AC power supply and is turned off.
2. Open the battery cover and move the locking bar aside.
3. Put the battery into the box and move the locking bar back. Please note that the battery cables should be
outward.
4. Connect the battery cable plug to the battery power socket in right direction, as shown in figure 3.6.
5. Arrange the wires and close the battery cover.
Figure 3.5 Underside of the monitor
7
Battery cover
Publicité
