Gima VITAL PRO SNET PC-900 Instructions D'emploi page 11

20. " " Up: shifts cursor forward/upward
21. " " OK: In setting menu, press it to confirm selection or modification; On history record screen, long
pressing this key to open up delete data dialogue box; On monitoring screen, short press to freeze/unfreeze ECG
waveform.
22. " "Down: shifts cursor backward/downward.
23. " " Display View key: short press to scroll through LCD display views or return to the upper level screen;
long press to enter into root setting menu display screen.
24. TEMP: TEMP probe connector.
25. NIBP: NIBP hose connector.
26. SpO : SpO sensor connector.
2 2
Note: A long press would mean press and hold for 2 seconds.
3.1.2 Side Panel
ECG Cable
connector
Figure 3.2 Right side of the monitor
The right panel of the monitor is as shown in figure 3.2.
² Symbol for CF type applied part with defibrillation-proof.
² ECG: ECG cable connector (Optional).
² " ○ ": reserved port for future use.
The left panel of the monitor is as shown in figure 3.3.
The built-in thermal printer is in the left panel. It is easy for user to print waveform and data if this is installed.
² "
the power is on, while the monitor is shut down, the green light is off. The other is for error indication, when the
paper is empty or the printer is out of order, the red light is on.
": printer status indicator. One is for power indication of the printer, the green light shows
Printer status
indicator
Figure 3.3 Left side of the monitor
5
Fan
Built-in
thermal printer
(Optional)