Hettich ROTO SILENTA 630 RS Mode D'emploi page 78

Operation
Immediate display of centrifu-
gation data after switching on
Switching off the centrifuge
6 Operation
6.1 Opening and closing the lid
Opening the lid
Closing the lid
24 / 50
Set the mains switch to
�� The buttons flash, depending on the centrifuge type.
The following indicators appear one after the other, depending on
the centrifuge type:
■
the centrifuge model
■
the last rotor code recognised by the rotor detection and the
maximum rotor speed
■
the program version
■
When the lid is closed:
■
When the lid is open: The centrifugation data of the last pro-
gram used or program 1.
1. Set the mains switch to
2. Press any button (except the
in the display (inverse display).
�� Centrifugation data is displayed.
The rotor is stationary.
Set the mains switch to
Personnel:
■
Trained user
The centrifuge is switched on.
The rotor is stationary.
Press the [Lid] button.
�� The lid unlocks by means of a motor.
The light on the
'Lid open' indicator appears.
The
CAUTION
Crushing hazard when closing the lid.
Danger of fingers getting crushed when the closing motor
pulls the lid against the seal.
−
No parts of the operator's body should be in the hazard
zone of the lid when closing the lid.
−
To close the lid, press on the lid from above.
NOTICE
Damage to the device caused by the lid slamming.
−
Close the lid slowly.
−
Do not slam the lid.
Personnel:
■
Trained user
Rev.: 20 / 01.2024
[I] .
'OPEN OEFFNEN' indicator
[I] .
[STOP] button) at the first visual change
[0] .
[Lid] button goes out.
AB5005en