Hettich ROTO SILENTA 630 RS Mode D'emploi page 73

Fig. 25: [STOP] button
Fig. 26: [t] button
3.6 Original spare parts
3.7 Scope of delivery
3.8 Returns
AB5005en
■
End the centrifugation run.
The rotor ramps down to a stop at the preselected brake level.
■
Runtime, parameter t/min:sec
Parameter t/min: Adjustable from 1 to 999 min, in 1 minute increments.
Parameter t/ :sec Adjustable from 1 - 59 s, in 1 second increments.
Continuous operation "---:--"
Use only original spare parts from the manufacturer and approved accesso-
ries.
The following accessories are supplied with the centrifuge:
■
1 grease for the trunnions
■
1 open-ended spanner (17 mm and 19 mm AF)
■
1 Hex key (5 mm x 170)
■
10 covering caps Æ12
■
3 Wood screw
■
3 Washer
■
2 Metal rail
■
4 Roofing nail
■
1 User manual
■
1 Instruction sheet for packaging removal
■
1 Instruction sheet for installation
■
3 Program data sheet for S control unit
Additionally for types 5005-08, 5005-80, 5005-90:
■
1 Notes on setup and installation
Additionally for delivery in Germany:
■
1 inspection book
Rotors and the corresponding accessories are supplied depending on the
order.
An original Return Material Authorisation (RMA) form from the manufacturer
must always be requested for a return. Secure and reliable acceptance and
booking in of the goods with the manufacturer is not possible without an
original RMA form from the manufacturer. The Return Material Authorisation
(RMA) form contains a Declaration of No Objection (UBE), which must be
completed in full and enclosed with the return.
Rev.: 20 / 01.2024
Device overview
19 / 50