To lower the hoist load, press and hold
the Directional Button DOWN (3).
The button-press is proportionally vari-
able. The depth of the button-press con-
trols the speed of the hoist.
Not
1
Pressed
Hoist
A
Speed
The chain hoist stops when the direction button
is released.
If both Directional Buttons UP (4) and DOWN (3)
are pressed and held simultaneously, the hoist
stops movement. Both buttons must be released
before the load movement can continue.
Stop
To activate Stop:
1. Press the STOP button (6).
–
Hoist receives Stop signal
–
Movement stops immediately
–
Remote Control turns OFF
To reset the Stop:
1. Rotate the STOP button (6) clockwise.
2. To turn the Remote Control back ON, press the Power
Button,
–
Remote Control links with the hoist
–
Normal functionality resumes
NOTE Turn the Remote Control off using the STOP button to
preserve the Remote Control battery life.
CAUTION
When not actively operating the hoist, the
Remote Control should be powered off using the
STOP button to prevent unintentional operation.
BatteryStar
TM
Fully
2
Pressed
Button
B
Press
Figure 4. Back of Remote Control
7
Knurled Screw Attachment
8
Removable Electrical
Disconnect Key
9
Label Location (Sides of
Battery Chamber)
10 Door Hinge and Lanyard
Attachment
11
AA Battery Chamber
NOTE The Remote Control is paired with the hoist at factory. If
re-pairing is required, follow the steps below.
Pairing Remote Control and Hoist
1. Ensure a battery is inserted in the desired hoist.
2. Remove batteries from all other hoists in the area
during the pairing process.
3. Press and hold the Pairing Button for 6 seconds.
Successful Hoist and Remote Control pairing:
–
Pairing/Linking LED Indicator is solid green
for 5 seconds and turns OFF
–
Power LED Indicator is solid green for 5 seconds
and turns OFF
If pairing does not occur after 5 seconds:
–
Pairing/Linking LED Indicator quickly flashes green
for 1 minute
–
Power LED Indicator quickly flashes green for
1 minute
–
Remote Control powers OFF
9
12 Diagnostic Port
13 Pairing Button and Icon
14 Pairing/Linking LED
Indicator
15 Belt Clip
P/N: 192097707YLEM June 2024