Yale BATTERY STAR Notice D'instructions page 20

TECHNICAL DATA
TORQUE SPECIFICATION
Table 8. Torque Specification
Fastener
Center Housing Screws
Suspension Bolt Screw
Bottom Hook Block Screws
Chain Stop
Chain Bag Bracket
Brake Dust Caps
Plastic Housing Screws
Hoist End Cap Bumpers
Motor Shaft Cover
Coin Cell Battery Cover
* All torque values are for clean, dry fasteners with pre-applied threadlocker.
DO NOT apply oil or any other lubricant to the fastener threads.
Torque value should be reduced by 20% when applying a liquid threadlocker.
Follow all instructions and warnings for inspecting, maintaining, and operating this hoist.
ORDERING INSTRUCTIONS
The following information must accompany all correspondence
orders for replacement parts:
Hoist Model and serial numbers from the product ID label.
BatteryStar
TM
Fastener Description
M6 TORX Head Cap Screw
M4 TORX Head Cap Screw
M6 TORX Head Cap Screw
M6 TORX Head Cap Screw
M6 TORX Head Cap Screw
M6 TORX Button Head Screw
M4 TORX Head Cap Screw
M4 TORX Head Cap Screw
M4 TORX Head Cap Screw
M4 TORX Head Cap Screw
WARNING
NOTE When ordering replacement parts, it is recommended
that consideration be given to the need for also ordering such
items as gaskets, screws and straps, etc. These items may be
damaged or lost during disassembly or just unfit for future use
because of deterioration from age or service
20
*
Seating Torque
Tool Required
T30 TORX Driver
T20 TORX Driver
T30 TORX Driver
T30 TORX Driver
T30 TORX Driver
T30 TORX Driver
T20 TORX Driver
T20 TORX Driver
T20 TORX Driver
T20 TORX Driver
P/N: 192097707YLEM June 2024
Recommended
Nm
10
3.5
10
10
10
10
2
1
1
1