AEG BSE798380B Notice D'utilisation page 225

Code and description
F111 - Food sensor is not correctly inserted into the
socket.
F240, F439 - the touch fields on the display do not
work properly.
F601 - there is a problem with Wi-Fi signal.
F604 - the first connection to Wi-Fi failed.
F908 - the appliance system cannot connect with the
control panel.
When one of these error messages continues to appear on the display, it means a faulty
subsystem may have been disabled. In such a case contact your dealer or an Authorized
Service Centre. If one of these errors occurs, the rest of the appliance functions will continue to
work as usually.
Code and description
F131 - the temperature of the steamer sensor is too
high.
F144 - the sensor in the Water drawer cannot measure
the water level.
F508 - the Water drawer does not work properly.
F602, F603 - Wi-Fi is not available.
12.3 Service data
If you cannot find a solution to the problem yourself, contact your dealer or an Authorised
Service Centre.
The necessary data for the service centre is on the rating plate. The rating plate is on the front
frame of the appliance cavity. Do not remove the rating plate from the appliance cavity.
We recommend that you write the data here:
Model (MOD.)
Product number (PNC)
Serial number (S.N.)
Remedy
Fully plug Food sensor into the socket.
Clean the surface of the display. Make sure there is no
dirt on the touch fields.
Check your network connection. Refer to "Before first
use" chapter, Wireless connection.
Turn the appliance off and on and try again. Refer to
"Before first use" chapter, Wireless connection.
Turn the appliance off and on.
Remedy
Turn the appliance off and wait until it cools down. Turn
the appliance on again.
Empty the Water drawer and refill it.
Turn the appliance off and on.
Turn the appliance off and on.
.........................................
.........................................
.........................................
ENGLISH 225