AEG BSE798380B Notice D'utilisation page 218

11.2 How to remove: Shelf supports
Remove the shelf supports to clean the oven.
Step 1 Turn off the oven and wait until it is cold.
Step 2 Carefully pull the shelf supports up
and out of the front catch.
Step 3 Pull the front end of the shelf support
away from the side wall.
Step 4 Pull the supports out of the rear
catch.
Install the shelf supports in the opposite sequence.
11.3 How to use: Steam Cleaning
Turn off the oven and wait until
it is cold.
Step 1 Fill the water drawer to the maximum level.
Step 2 Select: Menu / Cleaning.
Function
Steam Cleaning
Steam Cleaning Plus
Step 3
Press
The signal sounds when the cleaning ends.
Step 4 Press any symbol to turn off the signal.
When this function works, the lamp is off.
Turn off the oven.
218 ENGLISH
Before you start:
Remove all accessories and removable
shelf supports.
Description
Light cleaning
Normal cleaning
Spray the cavity with a detergent.
. Follow the instruction on the display.
When the cleaning ends:
When the oven is cold, dry the cavity with
a soft cloth.
Remove the remaining water from the wa‐
ter drawer.
1
3
2
Clean the bottom of the cavity and
the inner door glass with a soft cloth
with warm water and a mild deter‐
gent.
Duration
30 min
75 min
Leave the oven door open and wait
until the cavity is dry.