AEG BSE798380B Notice D'utilisation page 220

Step 3 Fill the remaining part of the water drawer with water to the maximum level.
Step 4 Select: Menu / Cleaning.
Step 5 Turn on the function and follow the instruction on the display.
The first part of descaling starts.
Step 6 After the first part is over, empty the deep pan and put it back on the first shelf position.
Duration of the second part: around 35 min
Step 7 Fill the water drawer with water. Make sure there is no remaining descaling agent inside the water
drawer. Insert the water drawer.
Step 8 When the function ends, remove the deep pan.
When this function works, the lamp is off.
Turn off the oven.
If some limestone residue remains in the oven after descaling, the display prompts to repeat the procedure.
11.7 Descaling reminder
There are two reminders which prompt you to descale the oven. You cannot disable the
descaling reminder.
Type
Soft reminder
Hard reminder
11.8 How to use: Rinsing
Turn off the oven and wait until it is cold.
Step 1 Place the deep pan on the first shelf position.
Step 2 Fill the water drawer with water.
Step 3 Select: Menu / Cleaning / Rinsing.
Duration: around 30 min
Step 4 Turn on the function and follow the instruction on the display.
Step 5 When the function ends, remove the deep pan.
When this function works, the lamp is off.
220 ENGLISH
When descaling ends:
When the oven is cold, dry the cavity
with a soft cloth.
Remove the remaining water from
the water drawer.
Description
Recommends you to descale the oven.
Obligates you to descale the oven. If you do not descale the oven when the hard
reminder is on, the steam functions are disabled.
Before you start:
Leave the oven door open and wait
until the cavity is dry.
Remove all accessories.