Installing The Nvr Software - Videotec ULISSE Manuel D'instructions

9.7.3 Installing the NVR software

A CD-ROM containing display and control software is
supplied for controlling the various units. Follow the
instructions below to install the software correctly.
Insert the CD-ROM in the player, and after a few
seconds the following introductory display will
appear.
Fig. 110
Select Videotec NVR Professional and follow the
instructions that appear on the screen.
When you have completed installation, and the pan
& tilts have been configured as appropriate (see
previous section), you can run the NVR software to
make the initial settings for the system.
Start the Activemonitor software.
You will have to insert the usual User Name (default:
Admin) and Password (default: 123456)
The first time you run the program, the following
display will appear, with an empty camera list
(Camera Tree).
Camera tree Tool bar
Manual control
Fig. 111
At this point you need to add the various devices
present in the system. Click on the Setup button in
the control bar.
Setup button
Fig. 112
Then click on Setup Camera.
Fig. 113
Insert the settings manually if you know the IP
addresses of the various units present, otherwise do
an automatic setup, which will identify the various
units.
Video Live
47