Installing The Housing; Fixing The Sunshield (Optional) - Videotec NXM36 Manuel D'instructions

6.1.1 Installing the housing

This section describes how to install the housing on
the wall bracket or on the Pan & Tilt head.
Before closing the housing, be sure to have rightly
fitted the internal slide according to the type of
installation.
Fig. 6 Wall installation.
Fig. 7
P&T installation.
6

6.1.1.1 Fixing the sunshield (optional)

Screw the equipped exagonal spacers on the flanges
of the housing (01). Position the sunshield on the
housing (02) and fix it on the spacers with the
equipped screws (03).
02
01
Fig. 8
03