Patrol Menu; Autopan Menu; Motion Recall Menu - Videotec ULISSE Manuel D'instructions

9.6.7.6 Patrol Menu

01. First Preset: Sets the first preset of the Patrol
sequence.
02. Last Preset: Sets the last preset of the Patrol
sequence.
03. Random Mode: Enables random execution. The
sequence is re-calculated on a continuous basis.
PATROL
------------------------
1>FIRST PRESET
2 LAST PRESET
3 RANDOM MODE
Fig. 91

9.6.7.7 Autopan Menu

01. Preset Outward Movement: Sets the initial
position of the Autopan.
02. Preset Return Movement: Sets the final
position of the Autopan.
AUTOPAN
------------------------
1>PRESET OUTWARD:
2 PRESET RETURN :
Fig. 92
j The movement speed is specified inside the
Preset ("9.6.7.4 Preset Menu (Edit Preset)",
page 40).
: 1
: 250
: N
1
2

9.6.7.8 Motion Recall Menu

It is possibile to set the P&T so that, after a given
inactivity interval, it automatically carries out the
movement function set by the operator.
From the menu it is possible to set the following
parameters:
01. Movement Type: Choice of type of movement
to be loaded (None, Home, Autopan, Patrol).
02. Movement Delay: The time (in seconds) that
needs to elapse from the state of inactivity of
the Joystick before loading the set movement.
MOTION RECALL
------------------------
1>MOVEMENT TYPE :
2 MOVEMENT DELAY:
Fig. 93
NONE
60
41