Integrated Day/Night Camera; Ip Video Encoder; Preparing The Product For Use; Safety Precautions Before Use - Videotec ULISSE Manuel D'instructions

5.4 Integrated Day/Night
Camera
Available version with SONY block camera, which
combines an incredible optical zoom ensuring a
high sensitivity in poorly lighted environments. The
camera features a wide excursion angle of view.
Fig. 05

5.5 IP video encoder

The pan & tilt can be fitted with a board for video
output through ethernet ("9.7 IP Board Configuration",
page 44).
Fig. 06
6 Preparing the product
for use
Any change that is not expressly approved
h
by the manufacturer will invalidate the
guarantee.
h All other parts must not be disassembled
or tampered (excepting for mounting and
maintenance operations according the
present manual).
6.1 Safety precautions before
use
g In the 120/230Vac powered configuration
it is necessary to insert a 1 0 unipolar
main switch (open contact distance
d>3mm) upstream on the power line. This
switch should be used to disconnect the
power supply before carrying out any
maintenance operation or before opening
the housing.
The appliance includes moving parts. Make
h
sure that the unit is positioned where it
is inaccessible under normal operating
conditions. Attach the warning label
supplied with the appliance, placing it near
the unit so that it can be seen easily.
Fig. 07
11