Installing The Software - Videotec MAXIMUS MPXHD Manuel D'instructions

9.1.3 Installing the software

Insert the CD and start the autoplay or launch the
installer. A web page opens for the installation of the
TVMS server application (32 or 64 bit, based on the
computer's features).
You will be asked login and password. When making
the settings for the first time insert the default login
and password.
• Login: admin
• Password: 1234
Select Camera from the Setup menu to add the
device to the VMS.
Fig. 22
Click Add.
Fig. 23
26
Assign a name to the camera and to the unit. Select
the ONVIF or TCAM protocol and set the device's
IP address and the access credentials. Select the
streaming profiles and make sure the entry Use PTZ is
enabled. Click Ok.
Fig. 24
The camera will be available in the device list (Camera
list) and can be displayed by dragging-and-dropping
the icon onto one of the squares not used.
Fig. 25
MNVCMPXHD_1801_EN