Manual Control Menu; Manual Control Menu (Limits); Preset Menu - Videotec ULISSE Manuel D'instructions

04. Patrol: To access the submenus used to edit
Patrol values.
05. Autopan: To access the submenus used to edit
Autopan values.
06. Motions Recall: To access the submenu which
manages automatic load of the movements.
MOTION
------------------------
1>OFFSET PAN:
2 MANUAL CONTROL
3 PRESET
4 PATROL
5 AUTOPAN
6 MOTIONS RECALL
Fig. 85

9.6.7.1 Manual Control Menu

01. Maximum Speed: Sets the maximum manual
speed.
02. Speed With Zoom: When enabled, this
parameter automatically slows down the PAN &
TILT speed, based on the ZOOM factor.
03. Tilt factor: Sets the reduction factor of the tilt
axis manual speed.
04. Movement Limits: To access the Limits menu
MANUAL CONTROL
------------------------
1>MAXIMUM SPEED
2 VEL. WITH ZOOM :
3 TILT FACTOR
4 MOVEMENT LIMITS
Fig. 86
+ 20.00
>
>
>
>
>
: 20.00
N
: 2
>

9.6.7.2 Manual Control Menu (Limits)

Once inside the Limits menu it is possible to set the
following parameters:
01. Pan Limits: Enables the limits of Pan.
02. Pan Start: Sets the start limit of Pan.
03. Pan End: Sets the end limit of Pan.
04. Tilt Start: Sets the start limit of Tilt.
05. Tilt End: Sets the end limit of Tilt.
LIMITS
------------------------
1>PAN LIMITS
2 PAN START
3 PAN END
4 TILT START
5 TILT END
Fig. 87
This is a dynamic self-configuration menu based on
che choice made and displays the parameters on
which it is possibile to operate.

9.6.7.3 Preset Menu

01. Edit Preset: Allows access to Edit Preset menu.
02. Utilities Configuration: Allows access to
Utilities Configuration menu
PRESET
------------------------
1>EDIT PRESET
2 PRESET UTILITIES
Fig. 88
: N
: + 0.00
: + 0.00
: + 0.00
: + 0.00
>
>
39