Maintenance - Corghi A 222 Manuel D'utilisation

Tyre pressure gauge needle fails to return to 0
Pressure gauge faulty or damaged.
➥ Replace the pressure gauge.
Avoid personal injery or death.
The "Spare parts" handbook does not authorise the user to carry out any work on
the machine other than the operations specifically described in the User Manual,
and is only intended to enable the user to provide the technical assistance service
with precise information in order to minimise response times.

8. MAINTENANCE

Any operation intended to modify the setting value of the relief valve or pressure limited
is forbitten. The manufacturer declines all liability for damage resulting from tampering
this these valve.
Before adjusting or servicing the machine, disconnect the electricity and compressed
air supplies and ensure that all moving parts are suitably immobilised.
Do not remove or alter any part of this machine (only technical assistance
personnel is permitted to do so).
When the machine is disconnected from the air supply, the devices bearing the
sign shown above may remain pressurised.
Before carrying out any maintenance operation or topping up with lubricant, disconnect
the machine from the compressed air supply line.
108
WARNING
WARNING
WARNING
WARNING
WARNING
WARNING
Operator's manual A 222