Basic Procedures - Use - Corghi A 222 Manuel D'utilisation

• depressed (held with foot): clockwise rotation at speed proportional to pedal
pressure
• raised (held with foot): single speed counter-clockwise rotation
11 Bead breaker shoe (mobile shoe to detach bead from rim)
12 Rim support.
13 LFilter/lubricator and pressure regulator (regulates pressure, removes water, lubri
cates and filters the compressed air supply)
14 Bead lifting tool (raises and positions the tyre bead on the mount/demount head)
15 Pressure gauge (for reading the tyre pressure), (T.I. version only).
16 Deflation button (press this button to discharge excess air from inside the tyre),
(T.I. version only).
17 Doyfe union (union to be fitted on the wheel valve for inflation).
18 Relief valve (max. pressure 12 bar) (in T.I. versions only).
19 Air tank (in T.I. versions only).
20 Inflation pedal (in T.I. versions only).
21 Inflation gun.
21 Inflation gun.
22 Bead breaker shoe protection (on request accessories).

6. BASIC PROCEDURES - USE

AVOID PERSONAL INJURY
Before working on the machine:
- disconnect the power supply plug
(Fig. 12a);
- isolate the compressed air line by
disconnecting the shutoff valve
(quick-release connector) (Fig. 12b).
90
WARNING
12a 12b
Operator's manual A 222