Unpacking/Assembly - Corghi A 222 Manuel D'utilisation

Handling
To move the packing, insert the tines of a fork-lift
truck into the slots on the base of the packing itself
(pallet) (Fig.3).
Before moving the machine, refer to the HOISTING/
HANDLING section.
Keep the original packing in good conditions to be used if the equipment has to be
shipped in the future.

3. UNPACKING/ASSEMBLY

Take the utmost care when unpacking, assembling, hoisting and installing the
machine as described below. Failure to observe these instructions can damage the
machine and compromise the operator's safety.
Before removing the machine from the pallet, make shure the items showed below have
been removed from the pallet.
- Remove the upper part of the packing and make sure that the machine has not suffered
damage in transit; identify the points at which the machine is anchored to the pallet.
- The machine comprises five main units (fig.4):
1 head
2 column guard
3 box with pressure gauge and standard equipment
4 air tank
5 body
- After removing the tower 1, it is advisable to place it in a horizontal position to prevent it
from falling and getting damaged.
82
NOTICE
WARNING
NOTICE
3
Operator's manual A 222