You should update the software regularly
to make sure the system is using the latest
software version and keep your Mateo TL
running at an optimum performance level.
1. Download the latest software package
from Leica official website, save it to a
USB disk, then plug the USB disk into a
USB port on the right side of the stand.
2. In the live view, click
to open system
"Settings" menu.
3. Click "About system", you can see the
current version of software.
MATEO TL Microscope User Manual
About system
Software version
Serial number
V1.1.0.602
2000000100101
License agreement
Update Software
A
shows up if the system cannot
obtain serial number. Hover the cursor
over the icon, you can see the detailed
reason for the presence of
, and you
are recommended to restart the system or
contact Leica service.
About system
Software version
Serial number
V1.0.1
N/A
The serial number cannot be obtained, please
License agreement
try to restart the device or contact the service
team.
Update Software
4. Click "Update Software". The following
window is prompted to remind you to
save all your important data elsewhere
before proceeding.
Updating Software
Update software
The system will restart when the update is completed,
pls make sure that all the data has been saved. Are
you sure you want to continue the update?
Cancel
Confirm
5. Click "Confirm" to proceed.
6. In the "Update software" window, select
the software package from your USB disk.
Then, click "Confirm" to start updating. It
shows following information.
Updating...
The upgrade will take some time, please do not turn off the power during the update process.
self = [super initWithFrame:frame textContainer:textContainer];
if (self ){
[self registerNotification];
self = [super initWithFrame:frame textContainer:textContainer];
if (self ) {
[self registerNotification];
self = [super initWithFrame:frame textContainer:textContainer];
if (self ){
[self registerNotification];
self = [super initWithFrame:frame textContainer:textContainer];
if (self ){
[self registerNotification];
if (self ) {
[self registerNotification];
self = [super initWithFrame:frame textContainer:textContainer];
if (self ){
[self registerNotification];
[self registerNotification];
self = [super initWithFrame:frame textContainer:textContainer];
if(self ) {
[self registerNotification];
50