Publicité
Les langues disponibles
Les langues disponibles
Connecting Power Supply
Prerequisites:
1. The power switch is on 'off' position.
2. The power indicator of Mateo TL is off.
Steps:
1.
Connect the power cable and the power adaptor.
2. Connect the power adapter to the power port on the rear side of
Mateo TL.
3. Connect the power cable to the power socket.
Turning on the System
1. Press the "On" end of the power switch at the lower rear side of the
microscope to turn on the system.
2. Check the LED status at the lower front side of your microscope:
●
Indicator light up: indicates the system of Mateo TL is on.
●
Indicator light out: indicates the system of Mateo TL is off.
MATEO TL Microscope User Manual
Installing Wireless Mouse
1. Plug the USB connector or USB dongle of your wireless mouse to
one of the USB ports on the stand (USB 2.0 port is preferred).
2. Power on your mouse, and move it around to make sure the cursor
moves along with your mouse accordingly.
Installing Keyboard
Mateo TL system comes with a built-in virtual keyboard. You can also
connect a physical keyboard, wired or wireless, if needed. (USB 2.0 port
is recommended for connection with the system).
The built-in virtual keyboard supports English and Chinese input.
Preparation
21
Publicité
