Leica MATEO TL Instructions D'utilisation page 49

You can also close the Confluency
module manually by clicking the
top right corner of the module. If the image
is not saved yet, a message is prompted to
remind you of that. You can click "Don't Save"
to exit without saving image or click "Save to
save and exit.
75%
confluency
Sensitivity
Recalculate
Save Confluency Image
Confluency
The current confluency result has not been saved. You can save it
and then leave.
Cancel Don't Save Save and Go
MATEO TL Microscope User Manual
Repeating
on the
Many experiments are conducted repeatedly
under the same conditions. With Mateo TL
microscope, you can take one image from
the gallery as a reference and reuse its
parameters to repeat the imaging conditions
of the reference.
1. In the live view, click
86
Show outline
where your experiment images are
stored.
Operations
2. Click the image of interest.
You can see all its parameters on the right
side of the screen.
to open gallery
3. Click "Repeat". The system starts verifying
whether the current imaging parameters
are identical with those of the reference
image.
46