Publicité
Les langues disponibles
Les langues disponibles
Taking an Image
In the live view, click the camera
top right corner of the screen to take an
image of the current sample view.
By default, the "quick save image" is enabled.
The image just taken is stored to gallery
automatically according to the image naming
rule of the system. To save an image manually
with a preferred name, you need to disable
the "Quick save image" in the system setting
(For details, please refer to "Quick Save Image"
on page 24).
MATEO TL Microscope User Manual
If the
grays out, hover your mouse
over the storage icon at the bottom right
corner to get further information. If it is due
at the
to shortage in storage space, please refer to
"Clearing Storage/Gallery" on page 48.
If the name of a new captured
image is identical with that of an existing
image in the gallery, the new image will
be renamed by adding a "-copy" suffix.
(For example, new image whose intended
name is identical with an existing image
"Leica_2021-12-12:12:00: 00.jpeg" will be
renamed as Leica_2021-12-12:12:00: 00-copy.
jpeg.) Such situation occurs mostly when
"Quick save image" is disabled and you are
manually naming a newly captured image.
The images are stored chronologically
to facilitate later reference and repeating
experiment. (For details, please refer to
"Repeating" on page 46).
Operations
Managing Images in
Gallery
The images you captured during experiments
are stored in gallery. In addition to viewing
images and checking image parameters,
you can also rename, delete, copy and share
images there.
Checking Image Parameters
1. Click
in the live view, you can open
the gallery where your experiment
images are stored.
2. Click the image of interest, surrounding
which red borders are visible. You can see
the original image and all its parameters
on the right side of the screen.
34
Publicité
