Leica MATEO TL Instructions D'utilisation page 25

Installing Object Guide
and Holding Frame
Object guide and holding frames are
optional items
Installing Object Guide
1. Locate the two screw holes on the right
side of the stage, as shown in the picture
below.
2. Align the two hexagon screws of the
object guide with the two screw holes on
the stage, as shown in the picture below.
3. Turn the two screws clockwise manually
until they are engaged with the holes.
MATEO TL Microscope User Manual
Installing Holding Frames
Align a holding frame with the installed
object guide, push the holding frame until
the fixing clip is locked with a click. See image
below.
Preparation
To uninstall/remove the holding frame,
you can pull it outward until it is off from the
object guide.
22