4. If there is any parameter discrepancy
(for example phase turret position or
objective position), a warning message
displays as shown below. Follow the
on-screen instructions to clear the
discrepancy.
Repeat
Contrast and objective are not the same as the repeated image.
Please try to rotate the phase turrent and nosepiece to the right position.
Reference image:
Present:
Objective: 20X, 82938299
Objective: 10X, 5345646657
Phase turret: PH1
Phase turret: PH0
How to set the contrast
Cancel
Ok, Start
5. Click "OK, Start" to start repeating.
Repeat
You are all set! All the conditions are the same with the reference image.
You can click to start to repeat experiment now.
Reference image:
Present:
Objective: 20X, 82938299
Objective: 20X, 82938299
Phase turret: PH0
Phase turret: PH0
Cancel
Ok, Start(5)
If "OK, Start" is not clicked, the "Repeat"
starts automatically in 5 seconds.
MATEO TL Microscope User Manual
Operations
47