Leica MATEO TL Instructions D'utilisation page 29

5. If you have other Leica objectives
installed, click "Others" and select the
correct objective in the list. Then, click
"Confirm" to finish the configuration.
Contrast method:
BF, PH0
Material number:
39482938484090
4X 10X 20X 40X Others
Objective setting
Click the "+" button to select the objective
1
you want to add to the current position
Objective setting
Then rotate the corresponding objective
2
to the current position
Only Leica objectives are supported.
Current position is always the rightmost
Objective
hole of the nosepiece
Cancel Confirm
Please rotate the nosepiece to the next
3
position and repeat the Step1 and 2
Objective setting
Click the "+" button to select the objective
1
you want to add to the current position
Objective setting
Then rotate the corresponding objective
2
to the current position
Only Leica objectives are supported.
Current position is always the rightmost
Objective
hole of the nosepiece
4X, 110506408, BF PH0
10X, 110506271, BF PH1
20X, 110506272, BF PH1
40X, 110506369, BF PH1
Please rotate the nosepiece to the next
3
4X, 110506226, BF
position and repeat the Step1 and 2
10X, 110506263, BF
20X, 110506276, BF
140X, 110506265, BF
100X, 110506238, BF
=
MATEO TL Microscope User Manual
After the completion of one objective.
You can repeat the above steps to configure
another objective. Please make sure the
objective to be configured is positioned to
the right of the nosepiece.
Delete the Objective Setting
If an objective is removed from the nosepiece,
it is necessary to delete the corresponding
objective setting.
1. Rotate the nosepiece to position the
objective to be removed at the right of
the nosepiece.
In the live view, click to open the system
"Settings" menu.
2. Click "Objective setting", and move your
cursor to the icon of the objective to
be removed until a trash bin icon
appears.
3. Click , then click "Confirm" to remove
the objective from the configuration.
4. Remove the corresponding objective
from the nosepiece.
Preparation
Objective setting
Click the "+" button to select the objective
1
you want to add to the current position
Contrast method:
BF, PH0
Then rotate the corresponding objective
2
5X Material number:
to the current position
39482938484090
Current position is always the rightmost
hole of the nosepiece
10X
20X
Please rotate the nosepiece to the next
3
position and repeat the Step1 and 2
Objective setting
Contrast method:
BF, PH0
Material number:
Click the "+" button to select the objective
39482938484090 1
you want to add to the current position
Then rotate the corresponding objective
2
Delete to the current position
Current position is always the rightmost
Are you sure you want to delete this
objective? hole of the nosepiece
Confirm
Cancel
20X
Please rotate the nosepiece to the next
3
position and repeat the Step1 and 2
=
5. If removal fails, a dialog box is prompted,
click "OK". Then, you can repeat above
steps to remove again, or close the
window to abort removal.
Objective setting
Click the "+" button to select the objective
1
you want to add to the current position
Then rotate the corresponding objective
2
Error to the current position
Current position is always the rightmost
Sorry, failed to save the objective
settings. Please try again. hole of the nosepiece
OK
20X
Please rotate the nosepiece to the next
3
position and repeat the Step1 and 2
26