Steam Tuner Function; Coooking With Core Probe And Δt - Angelo Po COMBIFIT CF623E Manuel D'installation, D'utilisation Et De Maintenance

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 100
3.8. The steamtuner function
Dom 02-10-15
Pasta al forno
fig. 23
The sign + indicates a concentrate steam suitable for cooking food
with particularly hard fibre: for example potatoes or carrots.
The steam-tuner does not modify the amount of steam inside the
cooking chamber, that remains at 100% at all times.
3.9. Coooking with core probe - ΔT
Dom 02-10-15
Pasta al forno
Pin type
fig. 24
measured by the probe in the middle of the product: once you have se-
lected the temperature of the room and of the probe, the cooking cycle
will stop when the temperature of the product recorded by the probe
reaches the set value.
The ΔT mode, instead, determines the temperature of the cooking
chamber based on the temperature measured by the core probe: by
setting a value ΔT equal to 25°, the temperature inside the chamber
remains steadily 25° higher than that measured by the probe in the
middle of the product. The cooking will stop when the temperature of
the product measured by the cooking probe reach the set value.
COMBIFIT
installation, use and maintenance manual
20:32
Fase 1/ 1
S9
100°
INF
PRE
HEAT
20:32
Fase 1/ 1
180°
80%
INF
S11
a
b
S10
SET
In STEAM cooking mode, it is
possible to operate the steam
tuner control (S9 - fig. 23).
The selector in middle position
indicates the average adjustment
of steam hydration. The quality
of the steam inroduced inside
the cooking chamber can be
adjusted by pressing keys.+ or -,
depending on the type of cooking
desired.
The sign - indicates a dryer and
soft steam suitable for baking
pastries, fish or leafy greens.
Select the option Probe/ΔT
an press the relative key S8
(fig. 24); on display appears
a
selection
(fig. 24) with two options: a =
ΔT (Delta-T), b = probe. Select
the desired mode by pressing on
display S10 (fig. 24).
Depending
on
mode, on display will be acti-
vated the rectangle for select-
ing the temperature. The probe
mode determines the cooking
time based on the temperature
window
S11
the
selected
19

Publicité

Table des Matières
loading

Table des Matières