Positioning - Angelo Po COMBIFIT CF623E Manuel D'installation, D'utilisation Et De Maintenance

1.2. Positioning

The appliances have been designed to be installed indoors and cannot
be used outdoors neither be exposed to rain.
The location designated for oven installation shoult have a solid, flat
and horizontal surface, able to safely support both the weight of the
appliance-support group and that the maximum rated load.
The appliance must be placed in a suitably ventilated room to prevent
harmful the excessive accumulation of harmful substances in the air.
The oven should be installed exclusively on a stable support.
Unpack the appliance and make sure it is intact. Arrange the operation
area being careful not to place it on top of or against walls, bulkheads,
partition walls, partitions, kitchen furniture or coating made in flam-
mable material.
We recommend you strictly comply with fire-prevention regulations in
force.
fig. 1
Make sure there is a minimum clearance of 50 mm on all sides be-
tween the oven and the wall or the other equipment (fig. 1).
All materials used for packaging are environmentally friendly; they can
be stored without any risk or be disposed of according to local regula-
tions in force.
6
COMBIFIT installation, use and maintenance manual