Troubleshooting; Storage, Cleaning - Crivit 338489 2001 Notice D'utilisation

Troubleshooting

No power
Ensure that the power adaptor is plugged
into a mains power source, and the power
adaptor connection is plugged into the
connection plug on the dartboard.
No results
Check whether the game is in "settings" or
"pause" mode. Check whether any buttons
or displays fields are stuck.
Stuck display elements or stuck
function buttons
During the transport, or during normal oper-
ation of the dartboard, the display elements
may get stuck temporarily, and results are
no longer shown.
A warning signal is emitted, and a display
light flickers, indicating the stuck element.
Gently pulling out the dart from the relevant
element, or flicking the element back and
forth with a gentle pressure usually frees
the relevant element quickly. The game
can then be continued, and the results are
displayed exactly where it was interrupted.
Removing broken dart tips
Soft tips are safe, but they don't last forever.
If a tip breaks off, and is stuck in the dart-
board, try to remove it with an appropriate
pair of pliers. If a tip is broken off ad is so
short that you it does not protrude from the
dartboard, it can be pushed out through
the opening on the dart plate. The soft tip
cannot damage the electronics behind the
element. To accomplish this step, we do,
however, expressly recommend using an
undamaged soft-tip dart. Never push a
short, broken-off tip through the dartboard
with a sharp metal object, as a metal object
can easily damage the plate, if it's inserted
into the dartboard too deeply.
The heavier the dart, the more apparent the
danger of the tip breaking off.
34 GB/IE
Power fluctuations or
electro-magnetic disruptions
In extreme situations, when massive elec-
tro-magnetic disruptions occur, the electron-
ics may cease to function, or may deliver
incorrect results.
Examples:
Heavy thunderstorms, extreme power fluc-
tuations, lack of tension, or if the dartboard
has been installed too close to electric
engines, or micro-wave ovens.
In order to restore normal functioning, the
network power adaptor must be separat-
ed form the power network for several
seconds, then reconnected. You should, of
course, ensure that the cause of the disrup-
tion has been fixed.

Storage, cleaning

IMPORTANT! Remove the mains
plug from the socket before clean-
ing the product.
Only clean the dartboard with a
moist cloth! The network adaptor
may not come into contact with
moisture!
Repeated use of the product mainly causes
dirt on the front side, due to touching with
fingers. Clean the front, the buttons and the
windows with a moist cloth.
As a solvent, we recommend water with
a little dishwashing product. Afterwards,
dry off with a soft, dry cloth. For extended
periods of non-use, cover the product with a
cloth, to protect it form dust.
When not in use, always store the product
clean and dry at room temperature.
IMPORTANT! Never clean the product with
harsh cleaning agents.