Qualification Of Operating And Specialist Personnel - Rohm CAPTIS-M Traduction Du Manuel D'utilisation Original

2.3

Qualification of Operating and Specialist Personnel

Trained personnel
Trained personnel have been instructed in correct handling and possible
dangers when using the collet chuck. In particular, the personnel must have
been instructed in the safety equipment.
Qualified personnel
Personnel without experience of handling a collet chuck are exposed to in-
creased risks of injury in the event of incorrect conduct, especially during
assembly and maintenance work, due to the clamping movements and
forces.
Therefore, the collet chuck may only be assembled, maintained and ser-
viced by persons who have received special training or instruction for this
purpose or who have extensive experience. The qualified personnel must be
able to read and understand the displays (e.g. pressure, force etc.) and to
act accordingly. The qualified personnel must have read and understood
this Operating manual.
In particular, qualified personnel are:
▪ mechanics
Work on the mechanical equipment may only be carried out by a trained
mechanic or by personnel under the direction and supervision of a trained
mechanic. Work on gas, pneumatic and hydraulic equipment may only be
carried out by mechanics trained for this purpose.
1242467 CAPTIS-M
Safety | 2
EN
59 / 240